Landrover / Range Rover

R.P.E can recondition your rover 3.5, 3.9, 4.0, 4.6lt and the 4.4 Leyland engine. We can supply new std/oversize pistons and rings, STD/undersize mains and conrod bearings with all new gaskets, seals, timing chain and components while servicing your heads, block bore and hone, crankshaft grind and balance within 1 gram and then assemble your engine. Or we can do just a top end or bottom end rebuild.

However we can also offer your rover some more performance by installing bigger valves in the heads with some porting. Supply flat top pistons with a combination of machining the deck and oversize bores. Will compliment it with a reground cam or billet cam with new lifters and performance timing chain set. Balance your engine within 1 gram and renewing all gaskets, bearings and seals. Then assemble.

We offer big bore and stroker engines up to 5.0lt.

We can also go further and install an aftermarket management system and tune to the modifications.

You can ‘drive in, drive out’ and we will dyno run before and after modifications to show the gains.

Call us at 02 6332 2233 or email us at engines@rpengines.com.au for more information and to discuss possible modifications to your setup.

Gallery